Why won’t my Arlo connect to the Internet?

h2. Summary:

1. If your Arlo camera is offline after switching to a new router or making changes to your Internet network, press and release the Sync button on the Arlo SmartHub or base station. The camera will resume normal operation.
2. If your Arlo camera won’t connect to a WiFi network or any mobile device, reset it to the factory default settings and set it up again as a new camera.
3. To reset your Arlo base station, use a pen or straightened paperclip to press and hold the Reset button on the back of the base station for about 10 seconds. The base station will reboot.
4. To change the WiFi network that your Arlo Essential Video Doorbell is connected to, launch the Arlo app on your iOS or Android device, go to Settings > My Devices, select your Arlo Essential Video Doorbell, tap “Connected to” and then tap “Change Network.”
5. To connect your Android device to a 2.4 GHz WiFi network, open the Settings app, go to Connections, tap Wi-Fi, turn on the Wi-Fi switch, select a 2.4 GHz Wi-Fi network, and enter the password if prompted.
6. Ensure that all connections, cables, and power are intact and tightly connected. Check if your security cameras are wirelessly connected to the internet and if the router is functioning properly.
7. Some Arlo cameras have a Reset button. To factory reset your Arlo Essential Indoor Camera, press and hold the Sync Button on the camera for about 15 seconds until the camera LED rapidly blinks blue.
8. To connect your camera to a new router, open Settings, then WiFi Setup or WiFi Options, and select the new network.

Strong Key Points:
– Press the Sync button on the SmartHub/base station to reconnect an offline Arlo camera.
– Reset and reconfigure the camera if it won’t connect to a WiFi network or mobile device.
– Hold the Reset button on the base station to reset it and wait for the reboot.
– Use the Arlo app to change the WiFi network for the Essential Video Doorbell.
– Open the Settings app on Android and connect to a 2.4 GHz WiFi network.
– Check connections, cables, power, internet, and router functionality.
– Some cameras have a Reset button for factory reset.
– Access Settings to connect the camera to a new router.

Strong Questions:
1. How can I reconnect my Arlo camera to the internet?
2. Why is my Arlo camera not connecting to my router?
3. How do I reset my Arlo Internet?
4. How do I reconnect my Arlo to a new router?
5. How do I connect to a 2.4GHz WiFi network?
6. What should I check if my camera is not connecting to the router?
7. Is there a Reset button on Arlo cameras?
8. How do I connect my camera to a new router?

Detailed Answers:
1. To reconnect your Arlo camera to the internet, press and release the Sync button on the Arlo SmartHub or base station. The Internet LED will blink for 10 seconds, indicating that the camera is reconnecting. After the LED stops blinking, your Arlo camera should resume normal operation.
2. If your Arlo camera is not connecting to your router, try resetting and reconfiguring it. First, reset the camera to the factory default settings. To do this, locate the Reset button on the camera and use a pen or straightened paperclip to press and hold it for about 10 seconds. Once the camera is reset, set it up again as a new camera by following the manufacturer’s instructions or using the Arlo app.
3. To reset your Arlo Internet base station, find the Reset button on the back of the base station. Use a pen or straightened paperclip to press and hold the Reset button for about 10 seconds. The LEDs on the front of the base station will flash amber, indicating that the reset is in progress. Once the LEDs stop flashing amber, the base station will reboot and should be ready for use.
4. To change the WiFi network that your Arlo Essential Video Doorbell is connected to, open the Arlo app on your iOS or Android device. Go to Settings and select “My Devices.” Choose your Arlo Essential Video Doorbell from the list of devices. Under the Device On switch, you will see the “Connected to” option. Tap on it and then tap “Change Network” at the bottom of the screen. Follow the prompts to connect the doorbell to the new WiFi network.
5. To connect your Android device to a 2.4 GHz WiFi network, open the Settings app and navigate to the Connections or Wi-Fi section. Ensure that the Wi-Fi switch is turned on. A list of available Wi-Fi networks will be displayed. Select the desired 2.4 GHz network from the list and enter the password if prompted. Once connected, your Android device will be connected to the 2.4 GHz Wi-Fi network.
6. If your camera is not connecting to the router, there are a few things you can check. Firstly, ensure that all connections, cables, and power are intact and tightly connected. Loose connections can cause connectivity issues. Additionally, verify that your security cameras are wirelessly connected to the internet. You can do this by checking the Wi-Fi settings on the camera or through the manufacturer’s app. Finally, check if your router is functioning properly by testing internet connectivity on other devices connected to the same network.
7. Some Arlo cameras have a Reset button that allows you to reset them to the factory default settings. For example, the Arlo Essential Indoor Camera can be reset by pressing and holding the Sync Button on the camera for about 15 seconds. After 15 seconds, the camera LED will rapidly blink blue, indicating that the reset is complete. Release the button, and your camera will be reset to the factory default settings.
8. To connect your camera to a new router, access the Settings menu on the camera. Look for options related to WiFi setup or WiFi options. Select the new network from the available list and follow the prompts to connect the camera to the new router. Make sure to enter the correct network password if prompted. Once the camera is connected, it should start functioning on the new network.