Summary of the article:
1. Frost guard on Netatmo: This mode turns off the water heater while still providing hot water for showers in the summer.
2. Away temperature on Netatmo: The “Away” mode sets a constant temperature of 12°C when you go out.
3. Netatmo relay: The Netatmo relay provides Wi-Fi connection to the internet and remote control through an app.
4. Controlling Netatmo thermostat: The thermostat can be controlled online using the Netatmo Energy app or manually with the + and – buttons.
5. Frost protection setting: It is recommended to set the frost protection temperature at around five degrees to prevent water from freezing before the boiler warms up.
6. Frost guard for vehicles: A frost windshield cover protects the windshield, wipers, and side view mirrors from freezing.
7. Setting the temperature when away: Set the thermostat to a higher temperature (not exceeding 85 degrees) during warmer seasons and to a lower temperature (not below 50 degrees) during colder seasons.
8. Adjusting temperature when leaving: It is recommended to adjust the thermostat by about 7-10 degrees lower when going away on vacation to conserve energy.
Questions:
1. What is frost guard on Netatmo?
Netatmo’s frost guard mode turns off the water heater while still providing hot water for showers in the summer.
2. What is the away temperature on Netatmo?
The “Away” mode on Netatmo sets a constant temperature of 12°C when you go out.
3. What is the relay on Netatmo?
The Netatmo relay provides Wi-Fi connection to the internet and allows remote control through an app.
4. How do I control my Netatmo thermostat?
You can control the Netatmo Smart Thermostat online using the Netatmo Energy app or manually using the + and – buttons on the thermostat.
5. What should frost protection be set at?
Frost protection should be set at around five degrees to prevent the water from freezing before the boiler has a chance to warm up.
6. What does a frost guard do?
A frost guard for vehicles covers the windshield, wipers, and side view mirrors, reducing the need for scraping or de-icing and preventing freezing.
7. What temperature should you set when away?
During warmer seasons, set the thermostat to a higher temperature (not exceeding 85 degrees) while you are away. During colder seasons, set the thermostat to a lower temperature (not below 50 degrees).
8. What temperature should I set when leaving?
When going away on vacation, it is recommended to adjust the thermostat by about 7-10 degrees lower to conserve energy while you are gone.
What is frost guard on Netatmo
This mode will automatically turn OFF your water heater. In summer, when you want to turn OFF your heating but enjoy hot water for your showers, apply the 'Frost-Guard' mode. Your domestic hot water planning will still be applied.
What is the away temperature on Netatmo
Netatmo Smart Thermostat for Individual Boiler, NTH01-EN-EC
And there are two special modes that set a constant temperature until they're turned off, or the timer you set runs out. The first mode, Away, is set to 12°C and is used when you go out.
What is the relay on Netatmo
The Netatmo relay provides Wi-Fi connection to the internet and remote control from an app.
How do I control my Netatmo thermostat
The Netatmo Smart Thermostat can be controlled online using the Netatmo Energy app, either the web version (my.netatmo.com) or mobile version (iOS or Android) via Wi-Fi or 4G. The Thermostat also has manual controls (+ and – buttons).
What should frost protection be set at
around five degrees
The frost protection setting turns your boiler on when it senses that the water in the system has dropped below a specific temperature. This temperature is usually around five degrees, and you wouldn't necessarily want it any lower than this, as the water could freeze before the boiler has a chance to warm up.
What does a frost guard do
COVERS WINDSHIELD, WIPERS, AND SIDE VIEW MIRRORS | The frost windshield cover reduces the need to scrape or de-ice your vehicle and prevents your windshield and wiper blades from freezing. With two sizes, you can find the perfect balance of a snug fit and great coverage against wintery elements.
What temperature should you set away
Vacation Recommendations
If your trip is during a warmer season of the year, then set the thermostat to a higher temperature while you're away (no higher than 85 degrees). If your trip is during a colder season, then set the thermostat to a lower temperature (no lower than 50 degrees).
What temperature should I set when leaving
Away for an extended period of time
If you are going away on vacation, we recommend adjusting your thermostat by about 7-10 degrees to conserve energy while you're gone. There's no use spending money on heating and cooling when nobody is home.
How accurate is Netatmo sensor
The accuracy of the CO2 sensor is ± 100ppm to 1000ppm and ± 10% for measurements greater than 1000ppm.
What is the difference between Relay and thermostat
A relay gets us around the requirement that every device in an electrical circuit has to be the same voltage. A thermostat is usually low voltage, 24V. The HVAC equipment that the thermostat controls is line voltage. Because they are different voltages, the thermostat and the equipment cannot be in the same circuit.
What settings should my thermostat be on
What temperature should you keep your house at Or better yet, “What is the most energy saving temperature to set my thermostat at” According to ENERGYSTAR.gov, the ideal home temperature should be between 70 to 78 degrees Fahrenheit.
Does Netatmo thermostat control hot water
The Modulating Thermostat regulates the domestic hot water supply in OpenTherm system boilers. It enables the remote activation or deactivation of hot water supply.
When should I turn on frost protection
The frost protection setting turns your boiler on when it senses that the water in the system has dropped below a specific temperature. This temperature is usually around five degrees, and you wouldn't necessarily want it any lower than this, as the water could freeze before the boiler has a chance to warm up.
Do I need frost protection
Frost occurs in temperatures below 32°F (0°C) so this is the point at which you need to be protecting plants in winter. Most plants will need protecting from temperatures of 30°F (-2°C) or lower, but frost tender specimens should be protected before temperatures dip this low.
When should I use FrostGuard
A: The FrostGuard is designed to block frost, snow and ice in cold weather. It should not be used as a sunshade or in extremely hot weather.
How do you use frost guard
Alright let's put it on super should be easy. Put that over there. Hopefully you can see that you put the tent.
Is 58 degrees too cold for a house
Recommended Temperature When You Are Home
The World Health Organization (WHO) recommends setting your thermostat no lower than 64 degrees (F) in the Winter months while people are in the home. If there are infants or elderly individuals, they recommend keeping the temperature at 70 degrees at a minimum.
What is the cheapest temperature to keep your house in winter
You can easily save energy in the winter by setting the thermostat to around 68°F to 70°F while you're awake and setting it lower while you're asleep or away from home.
What temperature should you leave an unoccupied house in winter
55 degrees Fahrenheit
Whether you plan to leave for a vacation or for the season, most heating and cooling professionals recommend setting the thermostat to 55 degrees Fahrenheit. This temperature will reduce your heating costs and minimize the risk for hazards such as frozen or burst pipes and flooding.
What is the best Netatmo alternative
The best alternatives to Netatmo are Amazon, Google, and WyzeCam. If these 3 options don't work for you, we've listed over 20 alternatives below.
What is the most accurate motion sensor
Passive Infrared (PIR) Motion sensors
PIR sensors are sensitive to IR (infrared radiation) and are useful for identifying people or animals at night time. In terms of their accuracy, resolution, and precision PIR sensors are incredibly effective considering their price.
What happens if you don’t use a relay
This can cause premature failure of the switch. Another required use for relays is when you're installing an electric cooling fan. If you wire direct, without a relay, all of the additional stress from the fan will be placed on the switch, leading again to early failure.
Why use a relay instead of a switch
Relays can reduce the need for high-amperage wiring and switches, which are expensive and take up space. Therefore, switching to relays in your electronic systems can reduce the size or weight of a casing, for instance, or allow manufacturers to fit more functionality into a space of the same size.
What’s the best thermostat setting for winter
The best average house temperature in winter is 68 degrees while you're at home. This temperature gives you a nice balance between comfort and energy efficiency. While you're away or sleeping, we recommend lowering your thermostat to around 60 degrees for additional cost savings.
Is 65 too cold for house in winter
The World Health Organization recommends keeping indoor temperatures between 64 and 75 degrees Fahrenheit for healthy people. The minimum temperature should be kept above 68 degrees Fahrenheit to protect the very young, the elderly, or people with health problems. Watch out for signs of hypothermia.
