Arlo Camera WiFi Reset and Connection Guide
1. How do I reset my Arlo camera WiFi?
To reset your Arlo Go camera while it is not connected to the cloud, follow these steps:
- Press and release the sync button on the top of the camera. You will hear a click.
- Hold the camera about 4 to 8 inches (10 to 20 cm) in front of the QR code until you hear a chime. Your Arlo Go camera is now reset to factory default settings.
2. How do I connect my Arlo base station to my new router?
To connect your Arlo SmartHub or Base Station to the Internet and add it to your Arlo system, follow these steps:
- Launch the Arlo Secure App.
- Tap “Add New Device”.
- Tap “Base Station/Hub”.
- Connect the SmartHub or Base Station to your Wi-Fi router using an Ethernet cable.
3. Can I have Arlo cameras on different WiFi networks?
After you connect your Arlo Baby camera to a different WiFi network, you must re-enable your camera before you can stream video from it. The camera is disabled as a security measure whenever Arlo detects a network change.
4. How do I connect my camera to my new router?
To connect your camera to your new router, follow these steps:
- Open Settings, then WiFi Setup or WiFi Options, if applicable.
- Make sure your camera’s WiFi connection is turned on.
- Your camera may automatically connect to your WiFi network. If not, choose your network name from the list of available networks.
5. How do I get my Arlo camera back online?
If your camera is offline after you switched to a new router or made changes to your Internet network, press and release the Sync button on the Arlo SmartHub or base station. The Internet LED will blink for 10 seconds, and then your Arlo camera will resume normal operation.
6. How do I factory reset and resync my Arlo camera?
To factory reset and resync your Arlo camera, follow these steps:
- Press and hold the Sync Button on the camera for about 15 seconds.
- Wait to ensure that the camera LED rapidly blinks blue after 15 seconds, then release the button.
- Your camera is now reset to the factory default settings.
7. Why is my Arlo not connecting to my new router?
If your Arlo still cannot discover your base station, you can perform the following troubleshooting steps:
- Check the color of the Internet LED on your base station. If it does not light after two minutes, the base station failed to connect to your router.
- Unplug and re-insert both ends of the Ethernet cable connecting your base station to your router.
8. How do I resync my Arlo camera to my base station?
To sync your camera to the base station, follow these steps:
- If you are using an Arlo base station, press the Sync button on the base station for about two seconds, until the LED on the base station starts blinking green.
- Press and release the Sync button on the camera.
- The LED on the camera blinks blue for about two minutes. Once the sync is successful, the LED on the camera turns solid green.
Remember to consult the official Arlo documentation or contact Arlo support for further assistance.
How do I reset my Arlo camera WiFi
To reset your Arlo Go camera while it is not connected to the cloud:Press and release the sync button on the top of the camera. You hear a click.Hold the camera about 4 to 8 inches (10 to 20 cm) in front of this QR code until you hear a chime: Your Arlo Go camera is reset to factory default settings.
How do I connect my Arlo base station to my new router
To connect your Arlo SmartHub or Base Station to the Internet and add it to your Arlo system:Launch the Arlo Secure App.Tap Add New Device.Tap Base Station/Hub.Connect the SmartHub or Base Station to your Wi-Fi router using an Ethernet cable.
Cached
Can I have Arlo cameras on different WiFi networks
After you connect your Arlo Baby camera to a different WiFi network, you must re-enable your camera before you can stream video from the camera. The camera is disabled as a security measure whenever Arlo detects a network change.
How do I connect my camera to my new router
Open Settings, then WiFi Setup or WiFi Options, if applicable. Make sure your camera's WiFi connection is turned on. Your camera may automatically connect to your WiFi network. If not, choose your network name from the list of available networks.
How do I get my Arlo camera back online
If your camera is offline after you switched to a new router or made changes to your Internet network, press and release the Sync button on the Arlo SmartHub or base station. The Internet LED blinks for 10 seconds, then your Arlo camera resumes normal operation.
How do I factory reset and resync my Arlo camera
Press and hold the Sync Button on the camera for about 15 seconds. Wait to ensure that the camera LED rapidly blinks blue after 15 seconds, then release the button. Your camera is reset to the factory default settings.
Why is my Arlo not connecting to my new router
If Arlo still cannot discover your base station, check the color of the Internet LED on your base station: If the Internet LED does not light after two minutes, the base station failed to connect to your router. Unplug and re-insert both ends of the Ethernet cable connecting your base station to your router.
How do I resync my Arlo camera to my base station
Sync the camera to the base station: If you are using an Arlo base station, press the Sync button on the side of the base station for about two seconds and then release the button. Note: If you press the Sync button on the Arlo base station for too long, the LED under the USB symbol blinks amber for 10 minutes.
Why is my Arlo camera not connecting to WiFi
Verify that you are in range of your mobile network.
For portable Arlo products like Go series cameras, make sure there is an activated SIM card inserted into the camera. Also ensure the camera is in range of your mobile network.
What network is Arlo connected to
2.4 GHz WiFi network
Your Arlo device directly connects to a 2.4 GHz WiFi network. This means that you must first connect your mobile device to your 2.4 GHz WiFi network, then connect your Arlo device to that same 2.4 GHz WiFi network during the setup process in the Arlo app.
How do I reconnect my camera after changing my Wi-Fi password
Tap the top menu (≡). Tap Devices and select the doorbell or security camera you need to reconnect to wifi. Tap Device Health. Tap on Reconnect to Wifi or Change Wifi Network.
How do I connect my devices to a new router
But if you want a general walk-through of setting up your home network, these steps should get you fully connected.Check your internet connection.Place the router.Connect to power.Connect to your internet source.Access the router's web interface.Connect wired devices.Connect your PC or device to Wi-Fi.
Why won t my Arlo camera reconnect
Make sure the camera LED is blinking blue while the camera is being discovered. (Note: The Arlo Video Doorbell LED ring blinks white.) The camera LED can time out if it blinks longer than two minutes without successfully connecting to your Wi-Fi network. If the camera times out, press the sync button again.
Why is my Arlo not connecting to the Internet
If Arlo still cannot discover your base station, check the color of the Internet LED on your base station: If the Internet LED does not light after two minutes, the base station failed to connect to your router. Unplug and re-insert both ends of the Ethernet cable connecting your base station to your router.
How do I reset my Arlo base station for a new router
Use a pen or straightened paperclip to press and hold the Reset button on the back of the base station for about 10 seconds. After the base station reset is complete, the LEDs on the front of the base station flash amber. When the LEDs stop flashing amber, your base station reboots.
Why is my Arlo camera not connecting to my WiFi
Verify that you are in range of your mobile network.
For portable Arlo products like Go series cameras, make sure there is an activated SIM card inserted into the camera. Also ensure the camera is in range of your mobile network.
Why can’t I get my Arlo base station back online
If Arlo still cannot discover your base station, check the color of the Internet LED on your base station: If the Internet LED does not light after two minutes, the base station failed to connect to your router. Unplug and re-insert both ends of the Ethernet cable connecting your base station to your router.
Why won’t my Arlo connect to my router
If Arlo still cannot discover your base station, check the color of the Internet LED on your base station: If the Internet LED does not light after two minutes, the base station failed to connect to your router. Unplug and re-insert both ends of the Ethernet cable connecting your base station to your router.
Do I have to reconnect my devices if I change my Wi-Fi password
If you change your network Wi-Fi password, all of your devices will be disconnected from Wi-Fi until you update those devices with the new password.
How do I reconnect my device to my Wi-Fi
Turn on & connectOpen your device's Settings app.Tap Network & internet. Internet.Tap a listed network. Networks that require a password have a Lock .
How do I switch to a different Wi-Fi
Change, add, share, or remove saved networksOpen your device's Settings app.Tap Network & internet. Internet. To move between listed networks, tap a network name. To change a network's settings, tap the network.
How do I connect to a new Wi-Fi
Enter the network password and tap Join. Android: In the notification bar, tap Wi-Fi > Details. Select a network and tap Add Network. Enter the password.
How do I reset my Arlo camera and resync
To factory reset your camera if it is offline:
Press and hold the Sync button for about 15 seconds, until the camera LED begins blinking Blue, then release the button. For Essential Wire-Free: Press and hold the Sync button for about 15 seconds, until the camera LED begins blinking Blue, then release the button.
Why won’t my security camera connect to my WiFi
Make sure to check that all connections, cables, and power is intact and tightly connected. If your security cameras are wireless, check the internet and make sure that it is connected successfully to the WiFi. You can also check if the router is properly working.
How do I get my Arlo base station back online
To power cycle your base station, unplug the power adapter from the outlet, wait two minutes, and reconnect the power adapter to the outlet. The base station takes one to two minutes to start. When the power LED and Internet LED light solid green, your base station is connected to the Internet.
